KURTI PATTERN -3

This black and white designer kurti is made with printed black & white cotton cloth with beautiful cut work the the lower side.(both front and back).

In this kurti collar has been attached to the neck.

I have taken ½ metre wide crochet lace purchased from market for making the patch.

25 cms white cotton cloth is being used for making the outline of the patch and rest is used for the lining of the back side.

Cutting Instructions:

First of all measure the length of kurti fold the whole cloth ( as cut work is on both sides) cut it into two parts.(vertically). This will make front and back part of kurti. This is very important  because we have to place the cutwork which is on the lower side of the cloth to the the upper side of back part.This is clearly illustrated in this picture.

Take the back side of the cloth measure the length of patch as required by you cut this part from the bottom.  ( preserve small 3” strip  of full width for sleeves.) Place white cotton fabric of same size to make a lining, stitch lining with piece (this will form a patch for back side)and finally stitch the patch with the rest of the cloth of back side.

Place both front and back part. Now make the drafting and cut according to measurements. For cutting instructions please refer to my earlier post HOW TO STITCH KURTA

As far as front part is concerned first cut the shape of neck place crochet lace as illustrated in picture. Take black and white stripes first stitch them together and then cover the patch as shown in design. 

In short first of all prepare front part , back part and sleeves. attach shoulders of front and back part., finish the neck and then add the collar, finally attach sleeves and  give fitting to the kurti.

 Hope you will find the instructions helpful.