Kurti Pattern/Design-4

Today I am showing you a Kurti design with patch work and machine embroidery. This is a designer kurti  differenet color cloth are used in front and back. On the top of front side black color patch is being attached. First of all  draw a neck, trace motif for embroidery and complete it. For embroidery zigzag stitch is being used with normal sewing thread. For the outline back stitch is used with silver thread. If you know machine embroidery you can complete outline with machine, as this was my first machine embroidery project I found easy to outline it with hand embroidery. After comleting embrodery iron it and then taking back part cloth make draft according to your measurements, instructions are given below:

A-K is kurti's length.
A-E is shoulder width.
A-D is neck width(standard is 3")
A-B is back neck
A-C is front neck
E-F is armhole cutting of back side.
E-G is front side armhole cutting.
H-G is 1/2 of waist measurement +1"
I-J is 1/2 of hip measurement +1/2"
K-L is 1/2 width of kurti(ghera).
Sleeve Draft.
A-D is half of armhole width.
A-B is length of sleeves.
B-C is arm width.
AFE1D is back side curve of sleeve.
AFED is front side curve of sleeve.
Draft and cut both arms with black color cloth.

Sewing Instructions

Take fusion paper draw neckline over it, cut it, place the glue side of fusion paper on the wrong side of cloth, stick it with the help of iron, cut extra cloth.

On the right side of cloth stitch neckline with fushion side facing up, turn the cloth side and finish neckline with hem or machine stitch.

Prepare back neck with bias strip.

Joint both shoulder part.

Attach sleeves.

Finally prepare slit parts and bottom folding.

Anarkali : Cutting and Sewing Tutorial

Anarkali is a multipanel kurta, numerous panels provide this attire a gorgeous look. Different types of anarkali’s can be drafted  with slight variation in cutting and sewing.
1 Half panel anarkali
2 Full panel anarkali
3 Traingle panel anarkali
4 Horizonatal panel anarkali
5 Single piece anarkali
In this tutorial I am showing you the simple and easy method of making full panel anarkali kurta with 8 panels each side.  This method of cutting applies only for the cloth which is plain or with same print on whole cloth. If cloth print is in certain direction from top to bottom or in certain direction after stitching panels will shown in opposite direction. In this type of print more cloth is required.

In this kurta I have attached a 8” piece of yoke over the full panels from both side this is easily seen in first picture.

Instructions.

Take whole length of cloth, fold the cloth. I have used 2.5 metres of cloth .Measure 46 “ as a length(mine is 45”+ 1” for folding). With the help of picture first draft panels and cut them accordingly. 16 panels(8 for front and 8 for back) are required.

A to B is length from shoulder to waist, B to F will constitute waist width after attaching all kalis.

From top each panel is 2.5” and bottom part is width is 7.5”. Its full ghera or width is 110”.

Attach kalis or panels and prepare front and back parts, now basic cloth is ready for cutting.

According to your measurements mark normal kurta pattern (for detailed instructions you can refer to my earlier post How to stitch kurta salwar top.

Sewing instructions:

In this kurta I  have attached 8” yoke cloth over top part of kurta.
First of all prepare neck pattern. Attach shoulder part.
Attach side lines from armhole to bottom.
 Attache the sleeves. Finish the bottom part by shaping it, (cutting excess cloth) fold the bottom, you can also attach border or lace to it. Your full panel anarkali kurta is ready .

Tags: Anarkali cutting and sewing tutorial,